Inventor Tutorials Galore!
Welcome to the Autodesk Inventor Tutorial page. This is where you will find all of the free Autodesk Inventor Tutorials written by Mark Randa. There are far more in-depth tutorials and targeted services, as well as free pre-built cabinet configurators in the subscription Cabinet Web Portal, but you can get a good start here. The Inventor Learning links below are separated by type. Tips & Tricks are brief, to-the-point instructions on how to save time on a task, inform you of a setting you may have been unaware of, etc. The next group is the How-to’s. The How-to’s are generally a bit more involved than the Tips & Tricks, and can run several pages or more. From there we move on to the Tutorials which are multiple page learning experience. And finally, there are the Series Tutorials which are like normal tutorials, but build upon one-another.
Inventor iDoor Tutorial
This series tutorial has 30 pages packed with Autodesk Inventor modeling knowledge. It takes you through all of the steps needed to create a basic SmartPart cabinet door. In part one (30 pages), you will learn:
This Series Tutorial has 20 pages, and builds on the completed Part One iDoor Tutorial by adding automatic Blum hinge bores based on specifications found on an online door manufacturer’s website. My idea for this model would be to feed output directly to a door subcontractor. At any rate, here is some of what this group of tutorials teach:
This Series Tutorial has 10 pages, and builds on the completed Part Two iDoor Tutorial by adding the raised panel and edge profiles. A few of the things you will learn in this final series are:
Of course you will learn a lot more than just the sum of the parts. These series tutorials teach workflows as well, and reinforce previously acquired knowledge.
This 20 page tutorial set is not really a series unto itself, but is more of an addition to the iDoor Series. There is another, set with the entire cabinet as well, but that is located in our Subscription Area where a very in-depth set of tutorials reside that cover Drawings, Cutlists, Machine Output, ERP Integration and more.
This 13 page tutorial, like the iDrawer Tutorials above, is not really a series unto itself. It is a tutorial that describes the methodology for supplying the profiles for cutters, etc. in a modular way for use in multiple configurators. I haven’t tested this in a good five years so feedback would be appreciated.
Introduction to iLogic Tutorials
These are the tutorials that Autodesk produced way back in 2009 I believe. This set of tutorials introduces you to iLogic and the concept of coding SmartParts and creating configurators.
The tutorial set is a bit dated, but should get one started with iLogic. For far more advanced iLogic as well as downloadable configurator models, you may want to think about subscribing to our Learning Portal.
All data and information provided within the free tutorial area of the ADI website is for informational purposes only. Applied Design Intelligence makes no representations as to accuracy, completeness, currentness, suitability, or validity of any information on this site and will not be liable for any errors, omissions, or delays in this information or any losses, injuries, or damages arising from its display or use. All information is provided on an as-is basis. All tutorials are written by Mark Randa, and the information imparted here represents my own and not those of Autodesk or any other entities. Any similarities to other articles or tutorials are strictly coincidental.All images are the property of Applied Design Intelligence except those on guest tutorials, where no copyright infringement is intended, and photos are published for educational purposes, in good faith and with respect to the copyright owner. Request for the removal of any photo welcome in order to abide by copyright laws, please contact us here. Autodesk, Inventor, iLogic, etc., are registered trademarks of Autodesk, Inc.In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this website.Every effort is made to keep the website up and running smoothly. However, Applied Design Intelligence takes no responsibility for, and will not be liable for, the website being temporarily unavailable due to technical issues beyond our control.