Placing the Cabinet Configurators
I also configured the finished ends. The cabinets came to 22” wide when all was said and done. Below is a look at the parts info automatically created for each cabinet…
I will be adding to the automatically generated info like that below constantly, so what you see may be much cooler. Below is the file list so-far. Again, leave these alone! There are getting to be quite a few files, but pay that no never-mind. You need to forget about the files and concentrate on outputted data to create your product.
That’s it for this tutorial. If you have any questions or suggestions, use the comments below or the Forum to ask away. [/level-advanced]