Inventor Tutorial for the iDoor – 08 – Sketching the Stile Profiles – Continued
Here is the video. when I found that the audio codec does not work on Windows 7, I pretty much just published it as-is. When they fix the codec I’ll update this…
Web video in general, and especially mine, blow chunks. But now on to the other stile. The left stile is simply a mirror image of the right stile, with the exception of the parameter for the width. Whereas the right one used Right_Stile_Width, the left uses, of course, the Left_Style_Width to control its width. If they were expected to always be the same, the resultant extrusion would have been mirrored, but that is not the case, so you will need to do it one more time in reverse. Just activate the sketch if needed, and start sketching starting on the left-hand projected point. The completed sketch should look like the image below, and while in sketch mode it should report a fully constrained sketch.
When you have the Stile Profiles sketch complete, the Rail Profiles sketch is made the same way. First, turn off the visibility of the Stile Profiles Sketch, and if its off, turn on the Layout Sketch. Turn the visibility of the YZ plane as well. Your model should look like the image below…
Inventor Tutorial for the iDoor Navigation
Intro – 1 – 2 – 3 – 4 – 5 – 6 – 7 – 8 – 9 – 10 – 11 – 12 – 13 – 14 – 15
16 – 17 – 18 – 19 – 20 – 21 – 22 – 23 – 24 – 25 – 26 – 27 – 28 – 29
